[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.99.5 (ULTRA-PCI) #145: Wed Feb 11 15:38:45 CET 2026 [ 1.000000] jdc@morava:/mnt/obj/sparc64/mnt/src/sys/arch/sparc64/compile/ULTRA-PCI [ 1.000000] total memory = 16384 MB [ 1.000000] avail memory = 16070 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root): SUNW,A70 (Sun Ultra 45 Workstation): hostid 840fc6f4 [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 0 [ 1.000000] cpu0: manuf 3e, impl 16, mask 34 [ 1.000000] cpu0: system tick frequency 20 MHz [ 1.000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1600 MHz, CPU id 1 [ 1.000000] cpu1: manuf 3e, impl 16, mask 34 [ 1.000000] cpu1: system tick frequency 20 MHz [ 1.000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.000000] memory-controller at mainbus0 not configured [ 1.000000] memory-controller at mainbus0 not configured [ 1.000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12 [ 1.000000] pyro0: pci0 at pyro0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb0: PCI Express capability version 1 [ 1.000000] pci1 at ppb0 bus 3 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb1: PCI Express capability version 1 x2 @ 2.5GT/s [ 1.000000] pci2 at ppb1 bus 4 [ 1.000000] pci2: i/o space, memory space enabled [ 1.000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00) [ 1.000000] ppb2: PCI Express capability version 1 [ 1.000000] pci3 at ppb2 bus 5 [ 1.000000] pci3: i/o space, memory space enabled [ 1.000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci0: interrupting at ivec 780 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci1: interrupting at ivec 780 [ 1.000000] ohci1: OHCI version 1.0, legacy support [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ohci2 at pci3 dev 28 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci2: interrupting at ivec 780 [ 1.000000] ohci2: OHCI version 1.0, legacy support [ 1.000000] ohci2: Clear PME# now [ 1.000000] usb2 at ohci2: USB revision 1.0 [ 1.000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) [ 1.000000] ehci0: 32-bit DMA [ 1.000000] ehci0: interrupting at ivec 781 [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: 3 companion controllers, 3 ports each: ohci0 ohci1 ohci2 [ 1.000000] usb3 at ehci0: USB revision 2.0 [ 1.000000] auacer0 at pci3 dev 29 function 0: Acer Labs M5455 Audio controller [ 1.000000] auacer0: interrupting at ivec 785 [ 1.000000] auacer0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo [ 1.000000] auacer0: ac97: ext id 0x601 [ 1.000000] audio0 at auacer0: playback, capture, full duplex, independent [ 1.000000] audio0: slinear_be:16 -> slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback [ 1.000000] audio0: slinear_be:16 <- slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording [ 1.000000] spkr0 at audio0: PC Speaker (synthesized) [ 1.000000] wsbell at spkr0 not configured [ 1.000000] alipm0 at pci3 dev 30 function 1alipm0: autoconfiguration error: can't map I/O space [ 1.000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8) [ 1.000000] aceride0: bus-master DMA support present, but unused (forced off by config file) [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 2f84 for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb3: PCI Express capability version 1 x2 @ 2.5GT/s [ 1.000000] pci4 at ppb3 bus 6 [ 1.000000] pci4: i/o space, memory space enabled [ 1.000000] ppb4 at pci4 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb3) [ 1.000000] ppb4: PCI Express capability version 1 [ 1.000000] pci5 at ppb4 bus 7 [ 1.000000] pci5: i/o space, memory space enabled [ 1.000000] bge0 at pci5 dev 4 function 0: Broadcom BCM5715 Gigabit Ethernet [ 1.000000] bge0: interrupting at ivec 3796 [ 1.000000] bge0: HW config 00000015, 00000015, 00000000, 00000000 00000000 [ 1.000000] bge0: ASIC BCM5715 A1 (0x9001), Ethernet address 00:14:4f:0f:c6:f4 [ 1.000000] bge0: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge0: setting short Tx thresholds [ 1.000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] bge1 at pci5 dev 4 function 1: Broadcom BCM5715 Gigabit Ethernet [ 1.000000] bge1: interrupting at ivec 3797 [ 1.000000] bge1: HW config 00010014, 00000014, 00000000, 00000000 00000000 [ 1.000000] bge1: ASIC BCM5715 A1 (0x9001), Ethernet address 00:14:4f:0f:c6:f5 [ 1.000000] bge1: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge1: setting short Tx thresholds [ 1.000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] ppb5 at pci1 dev 3 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb5: PCI Express capability version 1 x4 @ 2.5GT/s [ 1.000000] pci6 at ppb5 bus 8 [ 1.000000] pci6: i/o space, memory space enabled [ 1.000000] wm0 at pci6 dev 0 function 0, 32-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06) [ 1.000000] wm0: interrupting at ivec 3797 [ 1.000000] wm0: PCI-Express bus [ 1.000000] wm0: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff [ 1.000000] wm0: ASPM L1 is disabled to workaround the errata. [ 1.000000] wm0: RX packet buffer size: 32KB [ 1.000000] wm0: Ethernet address 00:15:17:a6:3b:ee [ 1.000000] wm0: 0x224040 [ 1.000000] igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 [ 1.000000] igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] wm1 at pci6 dev 0 function 1, 32-bit DMA: Intel PRO/1000 PT (82571EB) (rev. 0x06) [ 1.000000] wm1: interrupting at ivec 3794 [ 1.000000] wm1: PCI-Express bus [ 1.000000] wm1: 2048 words (16 address bits) SPI EEPROM, version 5.11.2, Image Unique ID ffffffff [ 1.000000] wm1: ASPM L1 is disabled to workaround the errata. [ 1.000000] wm1: RX packet buffer size: 32KB [ 1.000000] wm1: Ethernet address 00:15:17:a6:3b:ef [ 1.000000] wm1: 0x24040 [ 1.000000] igphy1 at wm1 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0 [ 1.000000] igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] ppb6 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb6: PCI Express capability version 1 x8 @ 2.5GT/s [ 1.000000] pci7 at ppb6 bus 9 [ 1.000000] pci7: i/o space, memory space enabled [ 1.000000] ppb7 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xaa) [ 1.000000] ppb7: PCI Express capability version 1 x8 @ 2.5GT/s [ 1.000000] pci8 at ppb7 bus 10 [ 1.000000] pci8: i/o space, memory space enabled [ 1.000000] ppb8 at pci8 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09) [ 1.000000] ppb8: PCI Express capability version 1 [ 1.000000] pci9 at ppb8 bus 11 [ 1.000000] pci9: i/o space, memory space enabled [ 1.000000] mpt0 at pci9 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02) [ 1.000000] mpt0: interrupting at ivec 2f8f [ 1.000000] mpt0: Phy 0: Link Status Unknown [ 1.000000] mpt0: Phy 0: Link Status Unknown [ 1.000000] scsibus0 at mpt0: 63 targets, 8 luns per target [ 1.000000] ppb9 at pci8 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09) [ 1.000000] ppb9: PCI Express capability version 1 [ 1.000000] pci10 at ppb9 bus 12 [ 1.000000] pci10: i/o space, memory space enabled [ 1.000000] mpt1 at pci10 dev 2 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.000000] mpt1: interrupting at ivec 2f90 [ 1.000000] scsibus1 at mpt1: 16 targets, 8 luns per target [ 1.000000] mpt2 at pci10 dev 2 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.000000] mpt2: interrupting at ivec 2f91 [ 1.000000] scsibus2 at mpt2: 16 targets, 8 luns per target [ 1.000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 2 [ 1.000000] pyro1: pci11 at pyro1 [ 1.000000] pci11: i/o space, memory space enabled [ 1.000000] radeonfb0 at pci11 dev 0 function 0: ATI Technologies FireGL V3100 (RV370) 5B64 (rev. 0x80) [ 1.000000] trying to read disabled BIOS... [ 1.000000] radeonfb0: No video BIOS, using default clocks [ 1.000000] radeonfb0: refclk = 27.000 MHz, refdiv = 12 minpll = 125000, maxpll = 400000 [ 1.000000] radeonfb0: 64 MB aperture at 0x10000000, 64 KB registers at 0x00100000 [ 1.000000] radeonfb0: display 0: initial virtual resolution 640x480 at 8 bpp [ 1.000000] radeonfb0: using 32 MB per display [ 1.000000] radeonfb0: port 0: physical 1024x768 60Hz [ 1.000000] radeonfb0: port 1: physical 1024x768 60Hz [ 1.000000] wsdisplay1 at radeonfb0 kbdmux 1 [ 1.000000] wsmux1: connecting to wsdisplay1 [ 1.000000] wsdisplay1: screen 0-3 added (fb, vt100 emulation) [ 1.000000] drm at radeonfb0 not configured [ 1.000000] ebus0 at mainbus0 [ 1.000000] flashprom at ebus0 addr 0-1fffff not configured [ 1.000000] bq4802rtc0 at ebus0 addr 100000-10000f: real time clock [ 1.000000] com0 at ebus0 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ebus0 addr 0-7 ipl 7c8: ns16550a, 16-byte FIFO [ 1.000000] env-monitor at ebus0 addr 0-41 not configured [ 1.000000] pcfiic0 at ebus0 addr 80-81 ipl 7c1 [ 1.000000] iic0 at pcfiic0: I2C bus [ 1.000000] pcagpio0 at iic0 addr 0x18: PCA9556 [ 1.000000] temperature (i2c-lm76) at iic0 addr 0x2b not configured [ 1.000000] temperature (i2c-lm76) at iic0 addr 0x48 not configured [ 1.000000] temperature (i2c-lm76) at iic0 addr 0x4f not configured [ 1.000000] seeprom0 at iic0 addr 0x52: front-io-fru-prom: size 8192 [ 1.000000] seeprom1 at iic0 addr 0x53: sas-backplane-fru-prom: size 8192 [ 1.000000] seeprom2 at iic0 addr 0x57: psu-fru-prom: size 4096 [ 1.000000] adt7462sm0 at iic0 addr 0x58: ADT7462 system monitor: rev. 0x4 [ 1.000000] adt7462sm0: 5 fans, 4 temperatures, 0 voltages [ 1.000000] lm95221ts0 at iic0 addr 0x2b: LM95221 temperature sensor [ 1.000000] lm75a0 at iic0 addr 0x4f: LM75A temperature sensor [ 1.000000] power at ebus0 addr e0-e1 ipl 7c3 not configured [ 1.000000] i2c at mainbus0 not configured [ 1.000000] i2c at mainbus0 not configured [ 1.000000] jbusi2c0 at mainbus0: addr 4000fc62020 [ 1.000000] iic1 at jbusi2c0: I2C bus [ 1.000000] seeprom3 at iic1 addr 0x57: nvram: size 8192 [ 1.000000] ppm at mainbus0 not configured [ 1.000000] pcons at mainbus0 not configured [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "tick-counter" frequency 1600000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 20000000 Hz quality 200 [ 1.000016] No counter-timer -- using %stick at 20MHz as system clock. [ 1.000016] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.748379] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.748379] uhub0: 3 ports with 3 removable, self powered [ 2.748379] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.748379] uhub1: 3 ports with 3 removable, self powered [ 2.748379] uhub2 at usb2: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.748379] uhub2: 3 ports with 3 removable, self powered [ 2.748379] uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.748379] uhub3: 8 ports with 8 removable, self powered [ 2.748379] scsibus0: waiting 2 seconds for devices to settle... [ 2.748379] scsibus1: waiting 2 seconds for devices to settle... [ 2.748379] scsibus2: waiting 2 seconds for devices to settle... [ 2.748379] IPsec: Initialized Security Association Processing. [ 2.854774] atapibus0 at atabus0: 2 targets [ 2.914776] cd0 at atapibus0 drive 0: cdrom removable [ 3.014775] cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) [ 3.014775] cd0(aceride0:0:0): using PIO mode 4 [ 3.824774] uhub4 at uhub3 port 7: vendor 0424 (0x0424) product 2502 (0x2502), class 9/0, rev 2.00/0.01, addr 2 [ 3.944386] uhub4: single transaction translator [ 3.999596] uhub4: 2 ports with 2 removable, self powered [ 4.884774] sd0 at scsibus0 target 0 lun 0: disk fixed [ 4.984776] sd0: 232 GB, 238472 cyl, 16 head, 127 sec, 512 bytes/sect x 488390625 sectors [ 5.094774] sd0: 825105 trailing sectors not covered by disklabel [ 5.172892] sd0: tagged queueing [ 5.214775] sd1 at scsibus0 target 1 lun 0: disk fixed [ 5.307482] sd1: 232 GB, 238472 cyl, 16 head, 127 sec, 512 bytes/sect x 488390625 sectors [ 5.424775] sd1: 825105 trailing sectors not covered by disklabel [ 5.496035] sd1: tagged queueing [ 7.514774] entropy: best effort [ 20.554774] swwdog0: software watchdog initialized [ 20.614774] sd0: 825105 trailing sectors not covered by disklabel [ 20.684773] sd0: 825105 trailing sectors not covered by disklabel [ 20.754774] sd1: 825105 trailing sectors not covered by disklabel [ 20.834773] sd1: 825105 trailing sectors not covered by disklabel [ 20.904773] WARNING: 3 errors while detecting hardware; check system log. [ 20.984773] root on bge0 [ 21.020346] nfs_boot: trying DHCP/BOOTP [ 25.104775] nfs_boot: DHCP next-server: 192.168.13.20 [ 25.164774] nfs_boot: my_name=zeus [ 25.204773] nfs_boot: my_domain=home [ 25.244773] nfs_boot: my_addr=192.168.13.49 [ 25.294774] nfs_boot: my_mask=255.255.255.0 [ 25.344773] nfs_boot: gateway=192.168.13.1 [ 37.564774] nfs server 192.168.13.20:/home/export/zeus/root: not responding [ 43.454774] nfs server 192.168.13.20:/home/export/zeus/root: is alive again [ 43.454774] root on 192.168.13.20:/home/export/zeus/root [ 43.518993] root file system type: nfs [ 43.563787] kern.module.path=/stand/sparc64/11.99.5/modules [ 43.630458] WARNING: clock lost 12 days [ 43.676294] WARNING: using filesystem time [ 43.725256] WARNING: CHECK AND RESET THE DATE!